Start with project status

The status says whether stock covers every cut, additional purchase is required, or something remains uncovered. Fix any blocking error before using the numbers.

Use Buy now at the shop

Buy now is the remaining bolt purchase after stock allocation, safety, and upward shop-increment rounding. No additional purchase means the entered stock covers the planned cuts.

Keep comparison concepts separate

Pattern says
The external reference you entered.
Fresh-fabric plan
All cuts from new fabric, ignoring stock.
Buy now
The shortfall after owned fabric is used.

Audit raw, buffered, and rounded lengths

Raw additional plan comes from placement geometry. Safety increases only new fabric. Recommended purchase rounds upward to the selected increment. These are intentionally different values.

Work through one shortfall

For four 10 × 10-inch cut squares, a 20 × 10-inch stock piece holds two. At 40-inch usable WOF, the two remaining squares fit in 10 inches of raw new-bolt length. With 5% safety, that becomes 10½ inches. A ⅛-yard purchase increment rounds it upward to ⅜ yard, or 13½ inches, for Buy now. The extra 3½ inches between raw length and shop amount is not a third required square: it reflects safety and whole-increment purchase.

Compare like with like

In that example, Fresh-fabric plan still considers all four squares on new fabric, even though stock covers two. Pattern says is the yardage you typed from an external pattern; a difference can come from its method, allowances, or usable width. If a pattern WOF differs from your plan, read the mismatch warning before comparing the figures. Check each fabric's Buy now separately, and recalculate after changing any input.

Review a project shopping list.