Measure each piece separately
Across-fabric width runs from selvage side to selvage side; length runs with the fabric. A 12 × 20 remnant and an 8 × 20 remnant stay two bins, not one 20 × 20 area.
Presets are editable conveniences
Fat quarter, fat eighth, quarter-yard, and half-yard actions fill common dimensions. Measure what you own and edit immediately. QuiltClarity plans the edited rectangle, not the preset label.
Quantity creates physical instances
Quantity 2 means two separately identifiable pieces. Allocation results retain each instance so the cutting plan tells you which piece to use.
Safety applies only to purchases
If the entered stock fits every cut, Buy now remains zero even when purchase safety is 5%. Safety cannot add margin to material already owned.
Try a fit check before treating area as yardage
A 20 × 10-inch remnant can hold two 10 × 10-inch cut squares. It cannot supply four, even though you can enter Qty 4 for the cut requirement. Record the remnant as one 20-inch across-fabric by 10-inch lengthwise stock piece, then let the planner allocate the two remaining squares to a purchase. Two separate 10 × 10 remnants may each hold one square, but neither becomes a 20 × 10 rectangle for a wider cut.
Review the actual piece before cutting
Label stock so you can match the result to fabric on your table. Check usable dimensions after selvages or damaged edges are excluded, and keep directional or WOF-strip requirements in the cut rows. A remnant can have enough area yet fail a required width or orientation. The result identifies each stock allocation and any purchased-fabric remainder.