Prepare one row per repeated cut

For each fabric, copy the piece label, quantity, width, height, and whether the pattern gives a Cut or Finished size. Add each project fabric before mapping rows to it.

Use the keyboard path

Tab through a row and press Enter from its last editable value to add the next row. New rows inherit fabric and size mode for speed, but never hide or inherit dimensions. Duplicate similar rows, then edit the differences.

Paste tabular data safely

Paste CSV or spreadsheet rows in Fabric | Label | Qty | Width | Height | Size mode order. Review the preview, resolve unmatched fabrics, and confirm. Malformed or ambiguous values never import silently.

Use More options only when needed

Set piece rotation, crosswise/lengthwise orientation, or WOF-strip behavior when the cut has a real constraint. Visible resolved cut-size feedback shows how Finished inputs use project seam allowance.

Check a row against the pattern

Suppose the pattern asks for four Background squares cut at 10 × 10 inches. Enter one row: Background, a useful label such as Corner square, Qty 4, Width 10, Height 10, and Cut. The four squares are four required pieces, not four copies of the row. If the pattern instead says four squares finish at 10 × 10 inches, choose Finished; with a ¼-inch seam allowance, the resolved cut size is 10½ × 10½ inches. Do not add that allowance yourself and also choose Finished.

Check a paste before confirming

For a spreadsheet, a row such as Background,Corner square,4,10,10,Cut uses the documented six-column order. The fabric must match a project fabric or be mapped in the preview. Check quantity, units, and size mode in every preview row; import happens only after errors are resolved and you choose Confirm import. If a pattern describes a block construction method in prose, work out its actual rectangular cuts before entering them here.

Open the project planner.