Quilting calculator

Pieces from Fabric Calculator

Check how many repeated rectangles fit in one real fabric piece, or whether a requested quantity fits.

Free · No account · Editable assumptions

Your measurements
 
 
 
 
 
 
 
 
 
 
Advanced settings

Seam allowance: 0.25

Advanced assumptions
 

How this calculator works

Assumptions

Fabric width is the crosswise axis and length is the lengthwise axis. Enter the physical rectangle you actually own. Finished piece sizes gain seam allowance before placement; cut sizes do not.

Methodology

This uses the same bounded deterministic finite-stock geometry engine as the project planner. The visual layout shows actual selected placements and practical rectangular leftovers; it does not promise a globally optimal packing.

Worked example

An 18 × 21 inch fat-quarter-shaped rectangle can practically hold twelve 5-inch squares in the locked test fixture. The diagram identifies every placed square and the remaining rectangular regions.

Limitations

The fit check uses one rectangular fabric piece and one repeated rectangle. It assumes the full entered stock area is usable and does not reserve space for selvages, damaged spots, or motif placement. Its bounded layout is a practical fit, not a guarantee of the mathematical maximum.

Common question

Can I check whether my exact quantity fits? Choose “Can I cut this many?” and enter the pieces needed. The result checks that count in the selected layout; if rotation or a directional print matters, set those controls before calculating.

Keep planning

Plan more than one piece

Combine all the rectangles for each fabric into a shopping list, cutting list, and visual layout.

Open the fabric cutting planner