Quilting calculator
Flying Geese Calculator
Calculate body and background cuts for conventional 2:1 Flying Geese, one or four at a time.
Free · No account · Editable assumptions
Your result
Recommended answer Calculated resultA value derived from the same validated inputs, assumptions, and calculation contract shown on this page.Learn more
How this calculator works
Assumptions
This calculator requires the conventional 2:1 finished width-to-height proportion. Trim-friendly mode adds squaring room. The four-at-a-time method is not described as no-waste.
Methodology
The selected method determines whether each batch uses one body rectangle and two background squares or one body square and four background squares. Batch counts round upward and expose produced extras.
Worked example
Twelve finished 4 × 2 inch geese made four at a time need three batches. In trim-friendly mode, cut three 5½-inch body squares and twelve 3⅛-inch background squares; trim the twelve units to 4½ × 2½ inches unfinished.
Limitations
These cuts apply to conventional Flying Geese whose finished width is twice their finished height. The calculator does not model other proportions, directional print placement, or fabric yardage for the starting cuts.
Common question
Which construction method should I choose? One at a time uses a body rectangle and two background squares per unit. Four at a time uses a body square and four background squares per batch and produces four units, so a partial batch may leave extras.
Keep planning
Plan more than one piece
Combine all the rectangles for each fabric into a shopping list, cutting list, and visual layout.
Open the fabric cutting plannerTransfers the compatible calculated cut requirement into the locally saved project for joint planning.